Taiko logo

Brand in Focus: Taiko Kikai Industries

Taiko Kikai Industries

WATMAR is proud to present Taiko Kikai Industries. An all-around fluid equipment manufacturer that develops and manufactures various types of pumps for marine, industrial (for factories and plants), medical and environmental applications. With roots in Japan, they are expanding their business in China and other global markets.

In this brand in focus allow us to walk you through Taiko’s vast range of pumps and fluid transfer systems for a wide range of fluid systems and applications.


Gear Pumps

Taiko Kikai has adopted single contact point segmental gears as the standard for our gear pumps.

They are used for conveying fuel oil, lubricating oil, or liquid chemicals.

Capacity: 0.25-1500m³/h

Maximum Discharge Pressure: 1.6MPa


One Rotor Screw Pumps 

Our high-volume one rotor screw pumps feature the rotation of a single-threaded metal male screw rotor inside the casing of a rubber double-threated female screw.

These pumps are used to convey liquids of both high and low viscosity, as well as liquids containing solid particles. Their most common use is to convey liquids that contain dirt, sludge, or bilge.

Capacity: 0.04-50m³/h

Maximum Discharge Pressure: 2.0MPa


Two Rotor Screw Pumps  

The Taiko Kikai two rotor screw pumps are high-volume pumps that convey liquids through two sets of screws, one left-handed and one right-handed, enclosed in the pump casing.

This product is well-suited to the non-lubricants, high-viscosity fluids, and hazardous fluids. It is used as cargo oil pump and chemical cargo pump.

Capacity: 50-1800m³/h

Maximum Discharge Pressure: 1.0MPa


Three Rotor Screw Pumps 

The three screw pump consists of one main rotor encased in a sleeve and two idler rotors driven by oil hydraulic pressure.  It is used as a fuel oil supply, circulating pump for engines, a fuel oil burning pump for boilers and a crosshead lubrication pump.

Capacity: 1.0-750m³/h

Maximum Discharge Pressure: 3.0MPa


Centrifugal Pumps

The Taiko Kikai centrifugal pumps convey fluids with centrifugal force using the revolution of the impeller installed inside the pump casing.

Centrifugal pumps have long been known as water pumps, and our products have been used as cargo handling pumps and ballast pumps for ships, as well as for conveying fresh water, sea water, oil, and liquid chemicals.

  • Capacity: 2.0-3800m³/h
  • Maximum Discharge Pressure: 2.4MPa


Piston Pump 

The Taiko Kikai piston pumps are a positive-displacement pump that transfers pump liquid by reciprocating the piston contained in the cylinder liner.
The reciprocating slider crank mechanism converts the rotational motion by the electric motor to reciprocating motion.
There are passages leading to the suction port and the discharge port in front of and behind the cylinder, and it is an efficient structure by suction + discharge stroke in one way. In addition, each passage is equipped with a valve, the structure is such that the liquid does not flow back.

  • Capacity: 0.5〜40m³/h
  • Maximum Discharge Pressure: 〜0.45MPa


15 PPM Bilge Separator 

Taiko Kikai’s USH series of marine bilge separators was developed by combining the technology of our three previous bilge separators when MEPC.107 (49) took effect., The USH series of new and powerful bilge separators is equipped with a high-performance, long-life coalescer capable of dealing not only with high-density and viscosity oil, but also emulsions that previous coalescers could not deal with.

  • Capacity: 0.15-5.0m³/h
  • Maximum Working Pressure: 0.3MPa

Sewage Treatment Plant 

Our SBH series of marine sewage treatment plants are small, high-performance items that were developed by incorporating the sewage treatment technology we developed over many years in the business.
The products in the SBH series can be used on all ships with more than 400 gross tons and a crew of at least 15 as specified in Annex IV of the Marpol 73/78 Treaty. We’ve also simplified operation and maintenance.

  • Capacity: 15 to 65 persons
  • Maximum Discharge Pressure: 0.2MPa


Rotary Blower 

Taiko Kikai’s rotary blower is a biaxial roots blower. The impeller configuration in our product lineup includes series with both two lobes and three lobes, depending on the use.

The blowers have many uses, including water treatment, pneumatic transportation, gas circulation, and PSA.

Capacity: 0.1-812m³/h

Maximum Discharge Pressure: 220kPa


Vacuum Pump 

Taiko Kikai’s screw-type dry vacuum pump is an innovative product employing a unique screw design. This design has enabled us to produce a pump with the world’s slowest screw rotational speed.

This highly dependable pump is used in a wide variety of vacuum applications, including such industrial sectors as semiconductors, liquid crystals, solar cells, pharmaceuticals, and chemicals.

Pumping Speed: 500-60000L/min

Ultimate Pressure: 0.08Pa


Diaphragm Pump 

We have several types of diaphragm blowers. One is electromagnetic-driven model that vibrates diaphragms by utilizing attraction and repulsive force between AC energized electromagnet and permanent magnet.

These blowers are used in a wide variety of applications, including aeration for wastewater treatment plants, bubble baths, health and medical equipment, and tanks for aquafarms, live fish and fish viewing.

  • Air Volume: 30-500L/min
  • Rated Pressure: 30kPa

Leave a Reply

Your email address will not be published.


eleven − 2 =